QoS | CAR, CIR, MIR, EIR, PIR, CDR

來源:本站原創 網絡技術 超過4,074 views圍觀 0條評論

Several a day ago I posted about CIR how to calculate TC, this is list figure of rate, if there is wrong CMIIW (correct me if I wrong)
Committed Access Rate (CAR) is used to limit traffic that can enter or exit an interface.
Committed Information Rate (CIR) is minimum bandwidth that is guaranteed to work under normal conditions, at any time the bandwidth should not fall below.
Minimum Information Rate (MIR) is minimum bandwidth, the lowest information rate will be assigned where there is congestion.
Excess Information Rate (EIR) is burstable bandwidth, CIR plus excess burst rate.
Peak Information Rate (PIR) is bandwidth will may use during data bursts when there is excess bandwidth available and no congestion also mention maximum information rate (MaxIR/MIR).
Committed Data Rate (CDR) refers also to voice and non-data packets and not only to data packets as in CDR.
All rate figure in kilobits per second (kbit/s).

文章出自:CCIE那點事 http://www.qdxgqk.live/ 版權所有。本站文章除注明出處外,皆為作者原創文章,可自由引用,但請注明來源。 禁止全文轉載。
本文鏈接:http://www.qdxgqk.live/?p=1656轉載請注明轉自CCIE那點事
如果喜歡:點此訂閱本站
上篇文章:
下篇文章:
?
?
萌宠夺宝游戏